KYNAR PVDF Heat Shrink Tubing Extruder and Expander, KYNAR PVDF Heat Shrink Tubing Extrusion and Expansion.
KYNAR – Semi-Rigid PVDF Heat Shrink Tubing/PDVF Shrink Tubing Production Line.
Kynar Heat Shrink Tubing normally designated as kynar tubing, is a cross-linked, thin-walled, heat-shrink tubing offering a high degree of mechanical strength and high-temperature resistance. Fabricated from polyvinylidene fluoride, the tubing has outstanding abrasion resistance and cut-through properties in combination with high dielectric strength.
It is inherently flame retardant, semi-rigid, and highly resistant to most industrial fuels, chemicals, and solvents. When heated over 347°F (175°C), tubing rapidly shrinks to a skintight fit.
* Medical & Pharmaceutical
* Engineering Polymers
* Semi-Finished Products
* Oil & Gas
* Wire & Cable
* Tube & Hose
* Automotive
* Packaging
KYNAR PVDF Heat Shrink Tubing Extruder/Extrusion Line The main equipment components: heat shrinkable tube extruder – extrusion mold – cooling&shaping water tank -roll tractor Auxiliary Machine; Winder Machine&Plying Machine, Splitter
Model SJ-30 for Φ0.5-Φ10mm, 5-20mtrs/min
Model SJ-45 for Φ6-Φ20mm, 8-40mtrs/min
KYNAR PVDF Heat Shrink Tubing Expander/Expansion Line
This production line uses glycerin as a heat conduction medium, Expansion, and set equipment are carried out by combining negative pressure (vacuum) and positive pressure (inner air). It mainly consists of the following parts:
1. Unwinding stand: made of the square tube or section steel, the unwinding reel rotates freely on it
2. Tube billet traction and feeding part: driven by the motor, the rubber roller feeds the tube billet into the glycerin box
3. Glycerin heating box: electric heating of glycerin to heat the tube blank, so that the irradiated tube blank reaches a molten high-elastic state
4. The conveying part of the glycerin heating box: the transmission part is driven by the motor to realize the continuous and uniform transportation of the tube billet in the glycerin box
5. Mold positioning part: used to install expansion mold
6. Vacuum control part: Control the vacuum size of the mold
7. Water cooling part: control the water volume of the mold, and cool the expanded heat shrinkable tube
8. Traction output part: The motor drives the rubber roller to pull and output the expanded heat-shrinkable tube
9. Finished product transmission output
LoWOLJIA designs and manufactures complete extrusion&expansion lines for producing Heat Shrink Tubing including pelletizers, extruders, expanders, tooling, and all auxiliary machines.
WOLJIA can offer you the most suitable product solution based on your demands, and customize your heat shrink tubing production line.
